Chapter3 BIOS Configuration
ISA-E2 User’s Manual
63
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and
write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choice: 3, 4, 5, 7, 9, 10, 11, NA.
PM Events
PM events are I/O events whose occurrence can prevent the system from entering
a power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything which occurs to a device which is configured as
On
, even when the system is in a power down mode.
VGA
When
Enabled,
you can set the VGA awakens the system.
LPT & COM
When
On of
LPT & COM, any activity from one of the listed system peripheral
devices or IRQs wakes up the system.
HDD & FDD
When
On of HDD
& FDD, any activity from one of the listed system peripheral
devices wakes up the system.
PCI Master
When
On of PCI Master
, any activity from one of the listed system peripheral
devices wakes up the system.
Modem Ring Resume
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming
call on the modem) awakens the system from a soft off state.
RTC Alarm Resume
When
Enabled,
your can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
