48
ITX-E8 User`s Manual
CPU Feature
Phoenix – AwardBIOS CMOS Setup Utility
CPU Feature
Delay Prior to Thermal
[16 Min]
Thermal Management
[Thermal Monitor 1]
X TM2 Bus Ratio 15 X
X TM2 Bus VID 1.004V
Item Help
Menu Level
↑↓→←
: Move Enter: /-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-safe Defaults F7:Optimized Defaults
Delay Prior to Thermal
Delay Prior To Thermal is set at 16 minutes as default, which means
the board will wait 16 minutes before it activates the processor's
integrated thermal control circuit.
The choice: 4 Min, 8 Min, 16 Min, 32 Min.
Thermal Management
The CPU Thermal Management is as TM1 as default.
Thermal Monitor 1: When CPU over-heated, the CPU internal clock
begin on die frequency throttling.
Thermal Monitor 2: When CPU over-heated, the CPU output VID will
adjust Vcore to designated voltage. In the mean time, the core
frequency speed will also slow down to (FSB MHz X Bus Ratio) MHz.
The choice: Thermal Monitor 1, Thermal Monitor 2.
TM2 Bus Ratio
The choice: 15X.
TM2 Bus VID
The choice: 1.004V.
Summary of Contents for ITX-E8
