Chapter 1 Introduction
4
PISA-E1 User’s Manual
Features
•
High-Speed Processors:
Supports Intel FC-PGA Pentium III
and Celeron Processor from 500 to 1.4GHz or above with
66/100/133MHz FSB Speed.
•
Low-Power Processors:
Fully support Intel Coppermine,
Tualatin and VIA C3 processor. Both Intel Tualatin and VIA
C3 CPU adapt 0.13 process and operate at lower voltage. This
provide the PISA-E1 system as a low power consumption
system.
•
VIA Twister-T AGPset:
Features VIA Twsiter-T AGPset
with I/O subsystems and front-side bus (FSB) platform,
which boosts the traditional 66/100MHz internal bus speed to
133MHz.
•
PC133 Memory Support:
Equipped with one DIMM sockets
to support Intel PC100/PC133-compliant SDRAM (8, 16, 32,
64, 128MB, 256MB or 512MB). Up to 512MB of PC133
SDRAM system memory.
•
Flexible Memory Speed:
The System memory bus speed can
be equal to CPU FSB and –33MHz or +33MHz of FSB Speed.
This gives users more flexibility to choose different memory
technology.
•
ECC function support:
Processor front-side bus (FSB) and
Memory subsystem support ECC function for Fault-tolerant
application.
•
10/100Base-T Fast Ethernet:
Features Two RealTek Fast
Ethernet controllers that boost network performance, increase
the networking bandwidth and reliability, enhanced system
manageability and offers the proven compatibility.
•
Integrated S3 Savage4 2D/3D/Video Accelerator:
The
VIA Twister-T chipset integrated S3 Savage4 2D/3D/Video
accelerator in Shared Memory Architecture (SMA). The 2D
hardware accelerator, 3D rendering engine, MPEG-2/DVD
decoder are integrated. The frame-buffer size can be adjust in
BIOS setup and stored in CMOS.
•
Direct Interface to broad range of LCDs:
Two LCD
connectors support wide range of LCD panels, includes
SXGA+ TFT color panel with 9-, 12-, 18- (both 1 pixel/clock
and 2 pixels/clock), and 24-bit; VGA, SVGA, XGA
dual-scan/single scan color panels with 8-bit, 16-bit and
