Chapter 1 Introduction
PISA-E1 User’s Manual
7
•
Multi I/O
:
Parallel Port
: One high-speed parallel port, SPP/EPP/ECP
mode.
Serial Port
: Four 16550 UART compatible ports with COM1,
COM2 and COM3 as RS232. COM4 can be RS-232/422/485.
IrDA Interface
: Pin-header connector for the optional IrDA
external connector
•
Enhanced IDE
: Two EIDE interfaces for up to four devices,
support PIO Mode 3/4 or Ultra DMA/33/66 IDE Hard Disk,
ATAPI CD-ROM, DOM and LS-120 drive
•
FDD Interface
: Two floppy drives (360KB, 720KB, 1.2MB,
1.44MB, 2.88MB)
•
S3 Savage4
: VIA 8606 integrates S3 Savage4 2D/3D/Video
accelerator.
Optimized Shared Memory Architecture (SMA).
8 / 16 / 32 MB frame buffer using system memory, selected
by user through BIOS setup.
High quality DVD video playback.
2D/3D resolutions up to 1920x1440.
Motion compensation for full speed DVD playback and
MPEG-2 video textures.
Extensive LCD Support, includes 36-bit DSTN/TFT flat
panel interface with 256 gray shade support, one 110 MHz
LVDS interface, Support for all resolutions up to 1600x1200,
Panel power sequencing, Hardware Suspend/Standby control.
Drivers for major operating systems and APIs: [Windows 9x,
Windows NT 4.0, Windows 2000, Direct3D, DirectDraw and
DirectShow, OpenGL
ICD for Windows 9x, NT, and 2000]
•
USB Interface
: Two USB ports interfaced with one 2x5
pin-header, compliant with USB Specification Rev. 1.1 and
support USB Hot-Plug function.
•
ATX Power Supply support:
On-board 4-pin ATX power supply header (requires the
passive backplane supports ATX power supply)
On-board power button header for Soft power off, i.e. front
panel turn off system power.
Support Win95 and Win98 shutdown automatically turn off
the system power.
