background image

 

 

3

4),

 Bottom side

 has 8pcs Sim card holder slots, you can insert Sim card for each slot when 

installation. 

2,Features:

   

1) It is a 8 channels GSM Gateway that has 8 ports FXS interfaces; 

2) It can connect with ordinary telephone set, PBX , VOIP Gateway, Billing meter etc.; 

3) Dialing tone frequency:450hz; 

4) Employ Industrial module Sim300(900/1800/1900Mhz),Sim340 (850/900/1800/1900Mhz) or 

Wavecom Q2303A,Q2403A,SIM300W ( 900/1800Mhz)] to make; 

5) Can adjust dial interval from 0.5sec to 9 secs by setting up from telephone set;   

6) Can adjust voice volume by setting up from telephone set; 

7) SIM card supported (1.8V, 3V); 

8) Caller ID display; 

9) DTMF Dialing; 

10) Bell signal; 

11) Polarity reversal; 

12) The RJ-11 socket which connect the phone or billing system for metering purpose; 

13) Antenna socket (SMA); 

14) IP Presetting; 

15) Working status and Signal Strength by LED indicator;                                                                                               

16) IMEI Change (optional) 

3,Technical Specifications

 

Air interface standard: GSM850/1900Mhz,900/1,800Mhz phase 2+ full band   

Frequency ranges: 

 A) GSM 850                                          GSM 1900: 

 I) Transmission: 869.2 ~ 893.8MHz       I) Transmission: 1, 930 ~ 1, 990MHz 

 Ii) Reception: 824.2 ~ 848.2MHz           Ii) Reception: 1, 850 ~ 1, 910MHz   

 B) GSM 900:                                         GSM 1800:   

 I) Transmission: 890 ~ 915MHz             I) Transmission: 1, 710 ~ 1, 785MHz                

 Ii) Reception: 935 ~ 960MHz                 Ii) Reception: 1, 805 ~ 1, 880MHz   

Phone interface: supply RJ-11 Phone Interface 

Hanging voltage: 45V 

Picking off voltage: 30mA / 41mA 

Dialing tone Frequency: 450Hz 

Antenna interface: Antenna amplifying>2.5db 

Sensitivity:<-104DBM 

Transmitting power<3W 

AC-Adapter interface: INPUT: AC 110~240V 

OUTPUT: 5V 7A 

AC-Power type: EU,US,AU,British can be optional 

Summary of Contents for ETROSS-8888









Reviews: