GSM Gateway ETS-16G User
’s Manual
Shenzhen Etross Telecom Co.,Ltd
11
3. Network Configuration
ETS provide two methods for you to enter into web configuration page.
3.1, IVR method configuration
Connect router’s cable to WAN port of ETS-16G, insert SIM card to SIM 1, connect Antenna for
Port 1,then switch on the device. Wait 1 minutes later, the device will fully startup.
Then you can call the number of SIM1 which you inserted to the ETS-16G, then your phone will
prompt you to input the code, input *****01# , you will hear the voice for WAN Port IP address
and LAN port IP address accordingly.
3.2,LAN port method configuration
Connect PC to LAN port of ETS-16G,set your PC to automatically obtain IP address. Check the IP
address information, you will get the LAN port IP address And its default gateway IP address. See
as below:
Figure 3-2-1 LAN & Default gateway IP address
All manuals and user guides at all-guides.com
all-guides.com