Four Channel’s GSM VoIP Gateway
22
then add “
:
” and the port number.
An example is
192.168.2.26:3000
or
hy.con.com:3000.
C
）
SIP Registrar Server
If the Registrar Server is different from the SIP port isn’t 5060, the Proxy, enter its IP
address or domain name in this field. If the registration ends up with add “
:
” and
the port number. An example is
192.168.2.26:3000
or
hy.con.com:3000.
D) Outbound Proxy
Outbound proxy
is mainly used in the
firewall/NAT.
It makes the
directive or stream
can through firewalls.
E
）
Ownership of the domain
It used on the
domain management host of SIP protocol.
F
）
Certification ID
It is used to fill certificate account when login the SIP proxy.
G
）
password
It is used to fill password when login the SIP proxy.
H) Display Name
When you call your friend John
，
your number will show on his phone.
I
）
Backup Server
The GoIP400 Gateway supports one Backup Server as an alternative to the main
server. Once registration to the main server fails, the GoIP400 Gateway will try to
register to the Backup Server.
I
）
Outbound Proxy
OutBound proxies are devices that will forward SIP signaling (and frequently RTP
media traffic too). OutBound proxies are used for a number of reasons, including,
firewall traversal – both in parallel with a firewall and situated in the Internet as a
Session Border Controller, and also for hiding customer IP addresses – calls are all
routed through one point so that a public ITSP address can be used for accessing the
customers, rather than the customer’s own IP address.
If required, enter this field with the outbound proxy IP address or domain name
as provided.
