Four Channel’s GSM VoIP Gateway
40
into follow option.
Disable
: When GoIP400 run as alone mode, please set all channels to
Disable mode
.
3.11 Dial Plan
Dial Plan defines how a number (VoIP) is processed when GoIP400 receives it. This
field is located in the Calling Setting Window and it is available for both H.323
Phone and SIP Phone. The Dial Plan is very flexible and can be configured for a wide
range of dialing applications.
The basic syntax is “<
event
>:<
action
>|<
event
>:<
action
>|…”, where
<
event
> defines the event to be matched. A event consists of a sequence of digits. If
a specific digit has a limited range, use the syntax
[A-B]
where A and B are both digit
(0 to 9)
and B is greater than A. The length of the input number can be limited by
using
“X”
to represent each unknown digit. If this field is omitted, it means any
event.
<
action
> defines the action to be taken on the number received and it consists of
“–“
(minus),
“+”
(plus), and digits.
“-“
followed by digits means to remove the
digits from the beginning of the number entered.
“+”
followed by digits means to
add the digits in front of the number entered.
“|”
means or and the order of priority is from left to right.
Note: For practical use, it should not be possible to reach the maximum length of the
Dial Plan string.
