2
Rate of humidity decrease
Low humidity gradient
1.2.1 Chamber
Specifications
1.2.2
Package D:
This configuration incorporates a single point controlled valve
(factory set to 5% RH; other values available) to regulate the flow of
nitrogen, dry air or other dry gas to provide controlled
dehumidification in the chamber at a single point. This system,
utilizing the ETS Model 5311 Controlled Gas Dehumidification
System, shown in Figure 1.2-1, is primarily used for storage or
single use applications.
Material:
Fan:
32 cfm (900 l/min)
¼” (6mm) clear acrylic front, top
(Specify 115 or 230VAC)
¼” (6mm) white, rear, side, bottom
Access Ports
(left side)
:
3/8”
(9mm) white left side
2x¼” (6mm) hose barbs
1x1” (25.4mm) Hose barb
Construction:
1x½” (12mm) compression fitting
6-panel, PS30 welded seams
1x1½” (31.4mm) cable pass through
Door
(left side)
:
Dimensions:
24”Wx18”Dx15”H
½” (12mm) clear acrylic with ½-turn latch
(61x46x38cm)
Seal:
¼” (6mm) Poron, non-setting gasket
Weight:
41 lbs (19kg)
Gloves
(when configured)
:
.
018” (0.5mm), replaceable hands
natural rubber, accordion sleeves,
8” (203mm) ports
Operating Range:
Humidity: <1 – 100%
Temperature: <32 – 135
°
F (0-55
°
C)