background image

Setting the SMEQ-1 levels 

Setting an equalizer for the desired overall sound is a subjective topic. Experimenting with the controls is the best way to 
learn and achieve good results. We recommend using headphones to evaluate the sound quality. Start with setting all 
controls to the mid-point (flat= no gain or cut). We suggest you do this when the desired sound source is present (people 
taking, being interviewed, etc.) Adjust each control clockwise and counter clockwise to get a feel for how each band 
affects the overall sound. Keep in mind that the human voice resides in the 1Khz-6Khz range. To focus on these bands 
the 60Hz, 150Hz, 400Hz and 10Khz controls can all be turned full counter clockwise. The remaining 3 controls (1Khz, 
2.5Khz and 6Khz) can then be adjusted for best sound clarity and intelligibility. Note- turning any of the controls fully 
clockwise will produce noticeable amplifier noise (a hissing sound). 

Figure 1. 

Caution 

It may be against the law to install this microphone kit in certain environments. It may also be against the law to record conversations of 
the person(s) being monitored without their knowledge. It is the responsibility of the installation company and end-user to determine if 
the application of this product is legal. These laws vary from state to state. If you are not informed on these matters, consult a qualified 
attorney or contact the appropriate state agency. A sticker is provided with this kit for the applications where notification must be 
posted. 

Warranty 

All ETS products carry a one year parts and labor warranty. This warranty does not cover damages as a result of misuse, improper 
handling of the unit or exposure to extreme temperatures or moisture. At its discretion, ETS reserves the right to repair or replace this 
unit under the conditions of the warranty. If you experience problems with your equipment call ETS at: 505-888-3923 to obtain a return 
authorization number. Equipment requiring repair beyond the warranty period or units that have been damaged or are not covered 
under the warranty can be repaired by ETS for a minimal cost under most conditions. 

Made in the USA 

by 

               Available from A1 Security Cameras 

    www.a1securitycameras.com email: sales@a1securitycameras.com

Reviews: