1646912
ETT Distribution GmbH Schmalbachstraße 16 38112 Braunschweig
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung Stand 12/2016
The Device and its Functions:
1.
Cabel tester „ST-50 USB“.
2.
Display with LEDs.
3.
Output connectors (RJ-11, RJ-45, IEEE 1394, USB).
4.
Connector for BNC-plug.
5.
Test-button.
6.
Remote Terminator (RT) with LEDs.
7.
Input connectors of the RT (RJ-11, RJ-45, IEEE
1394, USB).
8.
Battery compartment on the backside.
A.
BNC-connector.
B.
USB-connector (B-plug).
C.
IEEE 1394-connector (Firewire).
D.
RJ-11-connector.
E.
RJ-45-connector (screened).
F.
RJ-45-connector RT (screened).
G.
RJ-11-connector RT.
H.
IEEE 1394-connector RT (Firewire).
I.
USB-connector RT (A-plug).
J.
Display with LEDs.
K.
SHORT: Shows a short circuit in one or more leads.
Q shows the affected leads by flashing and two
acoustic signals sound.
L.
CONNECTED: Shows the proper connection of 1:1
wired cables.
M.
POWER: Operation display.
N.
CROSS: Shows in case of crossed leads and two
acoustic signals sound.
O.
NO CONNECTION: Shows in case of BNC-load
resistance or if the RT is not
connected. One acoustic signal
sounds.
P.
LOW BATT.: Shows when the battery
becomes weak and has to be
exchanged.
Q.
Display of each single lead 1 – 8 and
the ground connection G.
R.
Table for Q with the display of the
single leads referring to the certain cable
type for the case that the connection is
faultless.
