[11]
Position the bean hopper with the bean blocker handle
to the right on the intended opening (hopper holder, 6).
Close the locking levers (5, 7) in the CLOSE arrow
direction until they engage at the front in the locking
block and turn the bean blocker handle 180° rearwards
into the OPEN position (Fig. 2).
The hopper can now be filled with beans. Close the lid
by sliding it forwards.
Fig. 2
For
safety reasons
, the grinder cannot be operated without bean hopper.
4.2.2. Portafilter holder (17)
To adapt the portafilter holder to the size of the
respective portafilter, use the index finger to press
against the rear part of the upper holding arm
(Fig. 3) while sliding the arm in position with the
thumb ‐ upwards/downwards (Fig. 4).
Fig. 3
Fig. 4
