Powering Up the Tracker GT100
Tracker GT100 User Guide
Proprietary to EU3C Company Limited Reserved
3-3
3.3 Powering
Up
the
Tracker
GT100
1.
Press the
Power ON/OFF
button and hold for over four seconds.
2.
The Tracker GT100 will power ON and enter Standby mode as it acquires a satellite signal. Longer satellite
searching time may occur when powering up the Tracker GT100 for the first time or if the Tracker GT100 has been
moved to another state or country since the last time it was used.
3.
If there is no satellite signal or movement detected for a long period of time, the Tracker GT100 will enter power
saving mode as defined by the power saving parameter set using the PC Tracker Tool.