SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD
RC11 User Manual V01.1
3
www.euchips.com
After the code is cleared, the method of setting the group is totally the same as the principle of "matching the code
and grouping"
Recommended Application
The remote control can control many models LED driver and lamps
，
such as EUP20R-1WMC-0,EUP40R-1WMC-0,
,and bulb lamp.
Remark1:
When matching the code, press corresponding “Group ON” or ‘All ON’ continuously and quickly for 3 times, and clearing the
code, press continuously and quickly for 6 times.
Remark 2
：
One led driver can only match one group of the same remote, but one remote group can match countless led drivers, and
one led driver can match 10 remotes.
Remark 3:
The grades and the number of brightness are set in the LED controller, the remote control is responsible for sending the
command.
Remark 4:
The remote should not put in the area with large-scale metal or near strong electromagnetic wave region; otherwise the
communication distance will be seriously affected.
