EUCHNER 167948 Operating Instructions Manual Download | Manualshive

Page: 14 / 40

background image

Operating Instructions

Key Adapter CKS2-K-BP/BR-CC-FLX

14

(translation of the original operating instructions) MAN20001512-01-03/22

8.7. Notes on operation with safe control systems

Observe the following guidelines for connection to safe control systems:

Ì

Use a common power supply for the control system and the connected key adapters.

Ì

The following applies to BP devices:

The device tolerates voltage interruptions at UB up to 5 ms in duration, provided

that the time between two voltage interruptions is at least 500 ms.

Ì

The following applies to BR devices:

A pulsed power supply must not be used for UB. Tap the supply voltage directly

from the power supply unit. If the power supply is connected to a terminal of a safe control system, this output must

provide sufficient electrical current.

Ì

Always connect inputs FI1A and FI1B directly to a power supply unit or to outputs FO1A and FO1B of another EUCHNER

BR device (series connection). Pulsed signals must not be present at inputs FI1A and FI1B.

Ì

The safety outputs FO1A and FO1B can be connected to the safe inputs of a control system. Prerequisite: The input must

be suitable for pulsed safety signals (OSSD signals, e.g. from light grids). The control system must tolerate test pulses on

the input signals. This normally can be set up by parameter assignment in the control system. Observe the notes of the

control system manufacturer. For the test pulse duration of your key adapter, see chapter

15. Technical data on page 34

A detailed example of connecting and setting the parameters of the control system is available for many devices at

www.euchner.com, in the area

Downloads/Applications/CKS2

. The features of the respective device are dealt with there in

greater detail.

8.8. Connection without and with IO-Link communication

8.8.1. Connection without IO-Link communication

Only the safety and monitoring outputs are switched with this connection method.
With a series connection, the safety signals are looped through from device to device.

8.8.2. Connection with IO-Link communication

If, in addition to the safety function, detailed monitoring and diagnostic data are to be processed, a BR/IO-Link Gateway is

required.
To poll the communication data from the connected device, communication connection C is routed to the BR/IO-Link Gateway.
You will find further information in the operating instructions for your BR/IO-Link Gateway.

«
...
12
13
14
15
16
...
»

Summary of Contents for 167948









































Reviews:

No comments

Related manuals for 167948

Brand: D-Link Pages: 43

Brand: Airlink101 Pages: 4

Brand: Ableconn Pages: 15

Brand: Acard Pages: 2

Brand: Sabrent Pages: 4

LUXOMAT IR-RC-Adapter

Brand: B.E.G. Pages: 4

Brand: Daikin Pages: 36

Brand: B.E.G. Pages: 4

Brand: LM Technologies Pages: 27

Remote Supervisor Adapter

Brand: IBM Pages: 124

VERDEdri 17-10504K

Brand: World Dryer Pages: 8

PRESTO GIGABIT SERVER PCIe

Brand: Sonnet Pages: 4

FM 5 IN DASH ADAPTER KIT

Brand: Eagle Pages: 5

Brand: Belkin Pages: 38

Brand: Huawei Pages: 23

Brand: Huawei Pages: 57

Brand: RCA Pages: 2

Brand: Lava Computer Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands