background image

Operating Instructions

Electronic-Key-System EKS2

2

(translation of the original operating instructions) 2546099-01-10/21

Contents

1. 

About this document ............................................................................................. 3

1.1. Scope ............................................................................................................................................3
1.2. 

Target group ..................................................................................................................................3

1.3. 

Key to symbols ...............................................................................................................................3

1.4. 

Supplementary documents ..............................................................................................................3

2. 

Correct use .......................................................................................................... 4

3. 

Description of the safety function .......................................................................... 5

4. 

Exclusion of liability and warranty ......................................................................... 7

5. 

General safety precautions ................................................................................... 7

6. Function ............................................................................................................... 7

7. Smartcards .......................................................................................................... 8

8. Mounting .............................................................................................................. 8

9. 

Electrical connection ............................................................................................ 9

9.1. 

General notes .................................................................................................................................9

9.2. 

Notes about 

 ...........................................................................................................................9

9.3. 

Terminal assignment .....................................................................................................................10

10. Setup ................................................................................................................. 10

11. Operation ........................................................................................................... 10

12.  Status and fault displays ..................................................................................... 11

12.1.  Smartcard status and fault displays................................................................................................11
12.2.  EKS2 status and fault displays .......................................................................................................12
12.3.  Firmware status display .................................................................................................................13

13.  Technical data .................................................................................................... 14

13.1.  Technical data for EKS2 ................................................................................................................14
13.2.  Radio frequency approvals.............................................................................................................15
13.3.  Dimension drawing for EKS2… ......................................................................................................16

14.  Inspection and service ........................................................................................ 17

15. Service .............................................................................................................. 17

Summary of Contents for EKS2



















Reviews: