Operating Instructions
Electronic-Key-System EKS2
4
(translation of the original operating instructions) 2546099-01-10/21
2. Correct use
The device is used in combination with a touch panel or softkeys as part of a higher-level overall system for selection of
operating mode.
Before the device is used, a risk assessment must be performed on the machine, e.g. in accordance with the following
standards:
Ì
EN ISO 13849-1
Ì
EN ISO 12100
Ì
IEC 62061
Correct use includes observing the relevant requirements for installation and operation, particularly based on the following
standards:
Ì
EN ISO 13849-1
Ì
EN 60204-1
The device may be operated only with suitable smartcards and the EUCHNER connection components. On the use of unsuit-
able smartcards or other connection components, EUCHNER provides no warranty for safe function.
Important!
Ì
The user is responsible for the proper integration of the device into a safe overall system. For this
purpose, the overall system must be validated, e.g. in accordance with EN ISO 13849-2.
Ì
Use only components that are permissible in accordance with the table below.
Table 1: EKS components
Component
Order number
Euchner ID no.
Description
Reader EKS2-…
3784024
166521
Reader
Smartcard
3875478
3875479
3860313
3875480
166173
166174
166175
166176
Smartcard for selecting an operating mode
3875481
166177
Smartcard for selecting an operating mode and the Service mode
3796652
166178
Smartcard for selecting an operating mode and the device configuration
.NET library
2546104
2546104
EKS class library
testdmgmori.py
Use of the
pyeks
library
