9
Store the mini compressor in a dry, frost-free place. If the compressor
is not used for a longer period, charge the battery every 3 months.
Switch the mini compressor off before cleaning. Clean the housing
with a soft, dry cloth. Do not use any aggressive cleaning agents or sol-
vent-based cleaners. Never allow liquids to ingress into the housing.
7. MAINTENANCE AND CARE
7.1 MAINTENANCE
7.2 CARE
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
9. CONTACT INFORMATION
Do not dispose of electrical devices with the household
waste! Electrical and electronic scrap must be collect-
ed separately and disposed of in an environmentally
responsible manner for recycling. Please contact your
community or city administration regarding disposal
options for electrical and electronic scrap.
In connection with the sale of batteries and
accumulators and of devices that contain batteries and
accumulators, we would remind you of the following
as stipulated in § 18 of the German Battery Act (BattG):
Batteries and accumulators may not be disposed of in
the household waste system. As an end consumer you
are obliged under law to return spent batteries and
accumulators. You can return the batteries and
accumulators free of charge to a communal collection
point, retail outlets or directly to us (address in section 9).
Filling process
Press the ON/OFF switch for the compressor (Position 20 in the over-
view) to start the fi lling process.
The compressor starts, the pressures can be read on the display during
the fi lling process (Position 16 in the overview).
Once the set target pressure is reached, the compressor switches off .
Only allow the compressor to work without
interruption for maximum 5 minutes.
Then allow the compressor to cool down for at
least 15 minutes before continuing to work with
it.
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
The battery cannot be removed. Dispose of the entire
device.
Information about battery law
Old batteries may contain pollutants or heavy metals
that could damage the environment or cause physical
harm. Batteries can be recycled because they contain
important raw materials such as iron, zinc, manganese
or nickel.
Batteries and accumulators that contain pollutants are
marked with the symbol of a crossed-out waste bin and
the chemical name of the pollutant.
Here, Cd stands for cadmium, Hg for mercury and Pb for lead.
Switch off
Press the ON/OFF switch (Position 20 in the overview) for 3 seconds,
the device is switched off . If no switch is pressed, the device switches
off automatically.
LED light
You can
switch the LED light (Position 5 in the overview) on
and off with the button (Position 18 in the overview).
Cd
Hg
Pb
Summary of Contents for 21083
Page 26: ......
