Page 11 / 16
Folding the pedals
You can still fold the Miniped's pedals. This can be helpful when you want to take the Miniped onto public
transportation. Proceed as depicted in
Images 21 and 22.
Put the pedal back into riding position by lifting the outer end until the pedal clicks into place.
Always take hold of the pedal from the outside, never close to the pedal crank. There is a risk
of fingers getting crushed.
Unfolding the Miniped
Hold the Miniped firmly with one hand on the handlebars. Use the other hand to push the locking lever
(
Image 19
) upwards on the frame. Hold the lever firmly and press the frame with the seat post downward.
Let go of the lever halfway down and press the frame into riding position until the locking mechanism
clicks back into place. Straighten the seat again.
Ensure that the seat post quick-lock sits firmly and the tension lever is flat against the seat
tube.
5.3.4 Adjusting the seat height
To ride comfortably and safely, the seat must be set to fit your body size.
To adjust the height, open the quick-lock on the seat post (
Image 15).
Set the seat at a height where the
foot rests on the pedal on the lowest position while sitting with the leg not fully straight. You should be
able to comfortably touch the floor with the tips of your feet. Press the quick-lock lever until tight again.
Only pull the seat post out up to the
marking, lines,
Image 23.
The marking
cannot be visible!
Ensure that the seat post quick-lock sits firmly and the tension lever is flat against the seat
tube.
5.3.5 Parking the Miniped
First switch the Miniped off before parking it.
Only park the Miniped on a firm surface (no sand,
gravel or other loose surfaces). Fold out the stand
(
Image 24
) and lean the Miniped until the stand
touches the ground. Check that the Miniped stands
securely before letting go of it.
Image 23: Markings on the seat post
Image 24: Folding down the stand
Image 21: Releasing the locking
mechanism
Image 22: Folding the pedal
Marking for
maximum seat height
