16
17
Clean the Sensors and Charging Pins
To maintain best performance, clean the drop sensors and charging pins regularly.
• Dust off the drop sensors and charging contact pins using a cloth or cleaning brush.
Clean the Side Brushes
Foreign substances such as hair can easily get tangled in the side brushes and dirt may adhere to
them. Be sure to clean them regularly.
Carefully unwind and pull off any hair or string that is wrapped between the main unit
and the side brushes.
Use a cloth dampened with warm water to remove dust from the brushes or to gently
reshape them.
Use the side brushes only when they are completely dry.
T
Put the filters and filter cover back together in the dust collector and close it.
Push the dust collector back into the main unit.
- It is recommended to empty the dust collector and clean the filter after every use.
- You can wash the dust collector, filter cover and foam filter with water. Be sure to
air-dry them thoroughly before reassembling. Do not wash the HEPA-Style filter
with water, as it may damage the filter and reduce the suction power.
T
Clean the Rolling Brush
Pull on release tabs to unlock brush guard as shown.
Lift the rolling brush to remove.
Clean the rolling brush with the provided cleaning tool or a vacuum cleaner.
Reinstall the rolling brush by inserting the fixed protruding end first, then clicking into
place.
Press down to snap the brush guard into place.
1
4
2
5
3
