8.2.5 Getting status outside the transportation start flag
When the transportation start flag is not set, it is not possible to get the current status of temperature/humidity. If the
button ‘e’ is pushed shortly outside the transport start flag, the temperature icon will show a red light, indicating that the
start flag has not yet been set.
9 Configuration
All configuration of temperature/humidity limits are handled in the web platform. After an update of configuration online,
the Wi-Fi data logger should be pushed for changes to take effect, and a valid internet connection is required for
configurations to transfer to the Wi-Fi data logger.
10 Identification of devices
All units have two forms of identification:
Name
A user-friendly, non-unique name is written on the side of the Wi-Fi data logger and can be used for local identification of the
Wi-Fi data logger. The name is also visible on the web platform.
Note that the name is not unique, and it is possible to receive more than one unit bearing the same name.
Unique GRAI code
A unique GRAI code identification, which also includes the serial number of the Wi-Fi data logger, is placed on the side of the
Wi-Fi data logger in both text and as a barcode.
The entire GRAI code (GS1 standard) uniquely identifies the Wi-Fi data logger internationally and can be used with GRAI
compliant systems.
The last four digits of the GRAI-code contains the unique serial number of the Wi-Fi data logger and can be used to identify
the unit in Eupry’s system.
11 Cleaning guide
It is possible to clean the Eupry Wi-Fi Data Logger, if the device gets contaminated or before sending the device back to
Eupry. We recommend using soap for removing visible stains and alcohol for disinfection.
Please use one of the following cleaning methods:
○
Using a dry cloth and rubbing alcohol over 70%, to ensure removal of most pathogens.
○
Using a wring out cloth with soap, to remove dirt.
User Guide: Eupry Wi-Fi Data Logger
Rev. 0.8 - May 2021
Page 11 of 12
Eupry ApS | Dortheavej 59. 3. | 2400 Copenhagen | www.eupry.com/ | +45 53 51 77 00 |
support@eupry.com
