LED INDICATION CHART FOR
AQUAGUARD
®
ASTOR RO
HERE’S HOW YOUR AQUAGUARD
®
ASTOR RO+UV+MTDS WORKS
LED INDICATION CHART FOR
AQUAGUARD
®
ASTOR RO+UV+MTDS
PURIFICATION PROCESS IN YOUR
AQUAGUARD
®
ASTOR RO+UV+MTDS
UV disinfects the water by eliminating waterborne
disease-causing bacteria, viruses & protozoa,
thereby making it safe to drink.
i-Filter™
Multi-layered
Polypropylene roving
wound cartridge
Chemi-Block
(with built-in
Particle Trap
Filter™)
Dust Free
Bacteriostatic
Activated Carbon
Block
Removes fine suspended particles such as dust, dirt,
mud and sand from water.
Reduces excess chlorine, bad odour, colour and
organic impurities. It also removes very fine turbidity
causing particles.
Membrane Life
Enhancer***
Special Anti-scalant
Media
Prevents scaling of dissolved salts on the surface of
the membrane thereby enhancing the membrane life
and performance.
Reverse
Osmosis
Membrane
Thin Film Composite
(TFC) Reverse
Osmosis Membrane
UV e-boiling
Germicidal UV Lamp
Copper has antimicrobial, antioxidant, and anti-inflammatory
properties that help to support healthy metabolism. It also helps to
provide the body with energy and is much needed for growth and
development. The activated carbon removes organic components
and polishes the water, giving it a sparkling look, making it pure and
great to taste.
Active
Copper™
Bacteriostatic Taste
Enhancer with Active
Copper™ Technology
Reduces TDS, hardness, pesticides and heavy
metals like arsenic, lead and mercury. Eliminates
micro-organisms like bacteria, viruses, protozoa
and cysts.
TDS Regulator Mechanical System
Adjusts the TDS of purified water to provide healthy
water always.
1.
2.
3.
4.
5.
6.
7.
Power
Parameters
LED Indication RO+UV+MTDS
Remarks
All LEDs
Red, Green, and Blue will glow one after other for 1 sec.
Blue LED will be Solid if Power is Available.
Purification Process
Power
Service
Tank Full
Blue LED will be solid
Red LED will be OFF
Green LED Will Blink at 0.5 sec Rate for 6 secs
Blue LED will be Solid
Red LED will be OFF
Green LED will Blink at 0.5 secs Rate continuously
Blue LED will be Solid
Red LED will be OFF
Green LED will be solid
Blue LED will be Solid
Red LED will be Solid
Green LED will be OFF
Blue LED will be Solid
Red LED will Blink at 0.5 sec Rate
Green LED will be OFF
Blue LED will Blink at 0.25 sec Rate
Red LED will be OFF
Green LED will be OFF
Tank filling mode
Storage (Tank Full)
UV Lamp Error
SV/Pump Error
LPS
Power
Service
Tank Full
Power
Service
Tank Full
Power
Service
Tank Full
Power
Service
Tank Full
Power
Service
Tank Full
HYBRID DIVERTER
VALVE
NOTE : THIS IS A SCHEMATIC ILLUSTRATION OF THE PRODUCT TO GIVE A VISUAL SCHEME OF WORKING OF UNITS.
THIS IS NOT AN ACTUAL ENGINEERING DRAWING OF THE PRODUCT.
RAW WATER
INLET
SV-24V
BOOSTER PUMP
DRAIN
LPS
MEMBRANE LIFE ENCHANCER
TDS MODULATOR
E-BOILING
QG TUBE
4 w- UV LAMP
FLOW
RESTRICTOR
PURIFIED WATER
STORAGE TANK
FLOAT
DISC
FLOW
RESTRICTOR
RO MEMBRANE
I FILTER
CHEMI BLOCK
(WITH BUILT-IN PARTICLE TRAP FILTER)
( WATER FLOW DIAGRAM )
AQUAGUARD ASTOR RO + UV + MTDS
ACTIVE COPPERCARTRIDGE
Tank filling
mode
Power
Blue LED will be ON
Tank Full
Green LED will be ON
Parameters
LED indication RO
Remarks
Power ON
Blue LED will ON
.
Storage
(Tank Full)
Power
Blue LED will be ON
Tank Full
Green LED will be OFF
Blue LED will be "ON" continuously,
whenever the input power is available,
other LEDs will be ON/OFF based on the
conditions, refer below chart.
AQUAGUARD
®
ASTOR RO+UV+MTDS
TECHNICAL SPECIFICATIONS*
A QUICK CHECKLIST
CARTRIDGE LIFE
Note: Please refer Standard Test Conditions
#
for filter life.
**As per manufacturer's spec.
Water tastes
bad
1. Is the tank clean?
2. Have you kept the purified
water in the tank for too
long?
3. Is it time to change the
filter?
Less water has
been purified
1. Is the tap water valve
closed?
2. Is the tap water pressure
too low?
3. Filters may be clogged or
damaged?
Water doesn't
flow into the
storage tank
1. Is there water available in
the overhead tank?
2. Is the main water supply
tap closed?
3. Not sure what is wrong?
Water is
leaking
1. Is water coming out of
the top of the purifier?
1. Clean the storage tank.
2. Dispose of water and clean the tank.
3. Call an authorised Eureka Forbes
service technician.
1. Open the tap water valve.
2. If so, the amount of purified water will
be reduced.
3. Call an authorised Eureka Forbes
service technician.
1. Ensure the overhead tank is filled with
water.
2. Ensure the tap is open.
3. Call an authorised Eureka Forbes
service technician.
1. Close the tap water valve, unplug the
power cord and call an authorised Eureka
Forbes service technician.
Problems
Checkpoints
Solutions
Consumable Cartridges
i-Filter™
6000
#
Litres
Chemi-Block
Active Copper
™
Cartridge
UF Filter
UV Lamp (11W) (UV+UF)
UV Lamp (4W) (RO+UV+MTDS)
5000 burning hours**
RO membrane
Average Service Life
6000
#
Litres
6000
#
Litres
6000
#
Litres
8000 burning hours**
6000
#
Litres
Aquaguard
®
ASTOR RO+UV+MTDS
Model
2
Dimension (W X D X H)
320 mm X 278 mm X 476 mm
Net weight
7 kg (Approx.)
3
Purification Technology
RO+UV+MTDS
6.2 Litres (approx.)
4
Tank Capacity
i-Filter™, Chemi-Block, Reverse Osmosis Membrane,
UV e- boiling, Active copper™
5
Standard Filtration
supplied
1
1
Power Rating
40 Watts (Max.)
1
Input Iron (Max.)
0.3 mg/L
2
Total Dissolved Solids
(TDS) (max.)
Up to 2000 mg/L
5
++
Input Water
Temperature
10°C to 40°C
6
Total Hardness
600 mg/L
7
Input Chlorine Content
(Max.)
0.2 mg/L
3
Input Water Turbidity
(Max.)
5 NTU
4
Input Water Pressure
Range**
0.3 to 3 kg/cm
2
1
UV Lamp
4 Watts
3
UV Lamp Life
5000 burning hours (as per UV lamp manufacturer spec.)
4
Operating Voltage Range
150VAC to 250 VAC, 50 Hz
5
Power Supply
Input 230 VAC, 50Hz and Output: 24V (On board AC-DC)
2
ELECTRICAL SPECIFICATIONS
RECOMMENDED INPUT WATER PARAMETERS
PRODUCT SPECIFICATION
For Aquaguard
®
Astor RO+UV+MTDS / RO / UV+UF (Refer model specific components)
***Not a part of the product, Membrane life enhancer is recommended if the input water TDS is more than 1000 ppm
(mg/L) or input water hardness is more than 300 ppm (mg/L). Available at extra cost
*Technical Specifications are subject to change without prior notice.
Note: SMPS is designed to operate from 150VAC to 280VAC).
Note: The performance data presented in the table is applicable under standard laboratory conditions
#
.
Actual performance may vary depending on the input water quality, water pressure, turbidity and
condition of filters. Input water quality/pressure/TDS are important determinants of recovery rate and
rejection.
**If the input water pressure is more than 3.0 kg/cm
2
, installation of a PRV (Pressure Reducing Valve)
is mandatory. If the input water pressure is less than 0.3 kg/cm
2
, installation of a booster pump is
recommended.
If the input water TDS is more than 1000 ppm (mg/L) or input water hardness is more than 300 ppm
(mg/L), use of a Membrane life enhancer is recommended.
These accessories are available at an extra cost.
Warranty void if not installed as per recommendations.
#
Standard Test Conditions:
Feed Water Quality: TDS Max: 1000 mg/L with NaCl
Pressure: 1 kg/cm
2
, Turbidity: 1 NTU, Temperature: 25°C, Chlorine: below 0.2 mg/L,
Iron: below 0.3 mg/L, Life: 6000 liters, Pressure on membrane : 75 psi, Product recovery @25%
++
Membrane life enhancer is
recommended to be installed
if the TDS is above 1000 ppm
or hardness above 300 ppm
