7
UNPACKING
Make sure that all the parts indicated in the following list are present before unpacking the machine:
Squeegee;
battery cable fitted with connector, terminals and terminal covers;
on board battery charger;
NOTICE: brushes, discs and disc pad holders must be purchased separately.
Follow the instructions below to unpack the machine:
- connect the inclined ramp to the front part of the pallet, as shown in the figure;
- remove the fasteners fixing the front wheels and eventual other devices;
- make use of the inclined ramp.
CAUTION: DO NOT USE A FORKLIFT TO REMOVE THE MACHINE FROM THE PALLET AS IT MAY
CAUSE DAMAGE TO THE MACHINE.