9
1
2
3
4
5
Remove the 3 metal plate caps (pos. 1);
Remove the 2 bolts (pos.2);
Pull the safety lever (pos.4) in the direction indicated by the arrow and remove the connector (pos. 5) from the switch;
Remove the seat rest plate (pos.3).
1
2
3
4
To install the battery (position 3), lift it with an overhead travelling crane, a carriage or a crane and use a lifting beam
(position 1), chains or belts to fasten it.
Position the battery inside the compartment provided (pos. 4) on the machine by fitting it in the direction indicated by
the arrow and not lowering it from above. Position the poles (pos. 2) towards the right of the machine as shown in the
illustration.
