background image

Household Type

Owner’s Guide

2500 Series

Index

Important Safeguards ..................... 2
Service Information ........................ 5
Assembly ........................................ 7
Preparation ..................................... 8
Use ........................................... 11-15
Maintenance ............................ 16-18
Problem Solving ........................... 19
Order Form ................................... 21
Warranty ....................................... 23

IMPORTANT

Do not return this

product to the store.

For assembly problems or
questions contact:
 Eureka’s
Customer Service Division toll
free at 1-800-282-2886*,   8
a.m. to 7:30 p.m., (CST),
Monday - Friday and 10 a.m.
to 6:30 p.m. Saturday.

For replacement of broken
or missing items
 to be
shipped direct to you, call 1-
800-438-7352*, 8 a.m. to 4:45
p.m., (CST), Monday - Friday.

*En Mexico llame al 5670-6169

Rating Plate

The model, type, and serial numbers are on the rating plate on the back of
your shampooer. Write these numbers here on the front page and refer to
them when inquiring about service.

Model & Type__________________________________

Serial No. _____________________________________

MODEL               TYPE               SERIAL NO.

VOLTS                    AMPS.                     HERTZ

SERVICE INFORMATION: 1-800-282-2886

THE EUREKA COMPANY

BLOOMINGTON, ILLINOIS 61701

www.eureka.com

Summary of Contents for 2500 Series

























Reviews: