Eureka 6230 Series, Owner'S Manual

6

Using Your Cleaner

Release the cord by turning down the top cord hook
and connect to your electrical outlet.

Tilt the cleaner towards you (1) and tap the pedal
with your foot (2). The brushes will automatically
come into contact with the floor. Switch on.

For cleaning under furniture continue the downward
movement of the handle and tap the pedal once
more to bring the brushes into contact with the floor.

Filter indicator
Red neon indicator
comes on when the
washable HEPA filter
needs cleaning or
changing. See page
9 for instructions on
changing or cleaning.

3-speed Power Setting

Move switch from off
position increasing
power as you slide
switch from low to
high. High provides
the best cleaning
power and dust
separation.

The Controls

2

1

Off

Low

Med

High

Cleaner Height Setting

WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of

body away from any moving part (such as the revolving brush). Turn
off the switch and unplug the cleaner before changing the cleaner
height setting.

The front of the cleaner has an adjustment that
raises or lowers the cleaner base to match the
type of carpet. With the cleaner cord unplugged,
set the adjustment to lowest setting for
maximum cleaning. If the cleaner is difficult to
push, move adjustment to next highest setting
until cleaner is comfortable to push. The brush
roll must reach the carpet for effective cleaning.

LONG

                SHORT

PILE

               PILE