21
DRAINING AND CLEANING THE SOLUTION TANK
After completing the washing operation, in order to drain any leftover water from the solution tank, proceed as follows:
Turn off the brush function and lift the brush plate;
Lift the squeegee using the special lever, turn off the suction fan and go to the tank drainage area;
Try to stop the machine in a flat surface area;
Release the clean water level clear pipe (see position 1) from the knob located on the instrument panel;
Open the cap (see position 2) and lay the pipe on the ground.
Once the tank is drained, put the cap back into the pipe and place it into its special housing, hooking it back into the
knob (see position 1);
The filter located in the mouth of the tank used for filling clean water should be cleaned periodically;
It is also recommended to flush the tank periodically using water once it is drained completely; this will help prevent
incrustations due to the detergent solution.
Summary of Contents for E51 BASE
Page 2: ...3...
