EUREKA EC52 ESCALATOR
CLEANER
OPERATOR GUIDE
EC52
CALL 0141 647 4200 FOR ASSISTANCE
Step 2
– WET PHASE
Fit BLACK brushes
Fit the external vacuum cleaner hose to the escalator machine
RED
hose
FIT BLACK BRUSHES
REMOVE SIDE PANEL
ATTACH
RED
HOSE
Switch the brushes on and as with the dry phase, very carefully manoeuvre the machine onto the escalator
with the steps moving towards you and
apply the BRAKE
(be extra careful if you are cleaning at the top of
the escalator as the machine is moving away from you).
Switch water on
Switch vacuum on
Leave machine to clean escalator
After 5-10 minutes switch water off
Leave machine to vacuum any residue left on the escalator
Once all steps have been cleaned on the first side, swivel head (ensuring to secure black knob firmly into
place otherwise you could cause damage to the escalator) and repeat process to clean the other side of
the steps.
AFTER USE
▪
Switch off vacuum, brushes and power
▪
Empty tanks
▪
Check brushes
▪
Clean filter
▪
Wipe machine down with damp cloth
DO NOT
use with non-approved detergent (only a very small amount of low-foam s/dryer detergent)
