Eureka KOBRA EB, Instruction Manual

USE of MACHINE

PARKING BRAKE

RELEASE BRAKE

CLEANING THE FILTERS

VACUUM CUT-OFF

DRIVE

To release the brake, completely push the above mentioned (pic.8 pos.E).

The parking brake is activated by pressing the block lever located on the front wheel (pic.8 pos.D) 

The mechanical traction is engaged by pulling the lever (pic.1 pos.A) from the handle.

Note: we recommend, when turning, that speed be decreased to gain better maneuverability.

Effective operation of the sweeper depends on the state of the filters which must be kept clean. 

If the area to be cleaned is particularly dusty, filters must be shaken more often, at least every 5 

minutes. To clean the filter, move the handle (pic.6 pos.E) up and down 4-5 times.

Note: please note that this kind of filter need to be cleaned every 2-3 fillings of the dirt container.

When passing over wet floors it is necessary to cut off vacuum (fig.2 pos.B electric 

version, fig.4 pos.B Honda version)

"HONDA" MOTOR

ATTENTION!

For the maintenance and the correct use of the engine carefully read the 

original manual supplied by HONDA and strictly follow the instructions in it.

STARTING THE ENGINE

•  Pull the choke rod (consult the “HONDA” manual)

•  Place the accelerator lever in “MAX” position

•  Pull the starter grip lightly until resistance is felt, then pull briskly

•  If the choke rod has been pulled to the CLOSED position to start the engine, 

push it to the OPEN position as soon as the engine warms up enough to run 

smoothly

Note: the engine has been pre-set at 3100 rpm

STOPPING THE ENGINE N°1

Keep pushed the switch (pic.4-pos. G) until the engine cuts out

STOPPING THE ENGINE N°2

Place the accelerator lever in “STOP” position

For the replacement of engine oil, look the instruction and maintenance manual of HONDA engine.

A

B

C

D

E

C

A

B

C

D

E

FIG. 1

C

G

F

E

C

B

A

D

H

FIG.2

FIG. 4

A

B

C

E

F

D

G

B

D

C

A

E

FIG. 6

FIG. 8

A

B

C

D

E

10