14
CLEANING AND MAINTENANCE
DISASSEMBLY AND CLEANING OF THE POWER BRUSH
CAUTION
1.
In order to avoid affecting the operation of the power brush, perform cleaning and maintenance
when the roller brush or wheels are entangled or dirty;
2.
Before disassembling and maintaining, be sure to stop the operation of the power brush.
1.
Step on floor nozzle to lower handle. Turn vacuum face down on floor.
Use scissors to clip heavy threads or strings.
2.
If debris cannot be removed easily, remove retainer to access brushroll. Using flathead screwdriver or
coin turn screws to the 'unlock' position. Remove the brushroll and clear any tangled hair and
remaining debris.
3.
To reassemble:
a.
Align one end of brushroll with floor nozzle gear.
b.
Press other end into slot.
c.
Place retainer back in place and put in screws and turn to 'lock' position.
