2
Picolo HD series Installation Guide
Declarations
Notice for Europe
This product is in conformity with the Council Directive 2004/108/EC
This equipment has been tested and found to comply with EN55022/CISPR22 and EN55024/CISPR24. To meet EC requirements,
shielded cables must be used to connect a peripheral to the card. This product has been tested in a typical class B compliant host
system. It is assumed that this product will also achieve compliance in any class B compliant unit.
Notice for USA
Compliance Information Statement (Declaration of Conformity Procedure) DoC FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation or when the
equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This product is in conformity with the European Union RoHS 2011/65/EU Directive, that stands for "the restriction of
the use of certain hazardous substances in electrical and electronic equipment".
According the European directive 2012/19/EU, the product must be disposed of separately from normal household
waste. It must be recycled according to the local regulations.
Precautions for Use of Board Products
Electrostatic Sensitive Device
Boards may be damaged by electrostatic discharges. Follow the procedure hereby described and apply any general procedure
aimed at reducing the risk associated with electrostatic discharge. Damage caused by improper handling is not covered by the
manufacturer's warranty.
Electromagnetic Compatibility
Euresys boards are compliant with electromagnetic compatibility regulatory requirements. To ensure this compliance, the card
bracket must be secured with the relevant screw in accordance with the procedure described herein.
Risk of Electrical Shock
Do not operate the computer with any enclosure cover removed. During the hardware installation, ensure the AC power cord is
unplugged before touching any internal part of the computer.
Heating Device
It is normal for a board to dissipate some heat during operation. All enclosure covers, including blank brackets, must be fitted
correctly to ensure that the fan cools the computer adequately.
Hot Plugging Forbidden
Uncontrolled plugging and unplugging of equipment may damage a board. Always switch off the computer and any relevant
system device when connecting or disconnecting a cable at the frame grabber or auxiliary board bracket. Failure to do so may
damage the card and will void the warranty.
