37
EN
Vibration emission value
Vibration value determined in accordance with EN 60745-2-13
Rear Handle a
h
4.92m/s
2
Front Handle a
h
2.57m/s
2
Uncertainty K
1.5 m/s
2
- The declared vibration total values and the declared noise emission values have been
measured in accordance with a standard test method and may be used for comparing
one tool with another.
- The declared vibration total values and the declared noise emission values may also be
used in a preliminary assessment of exposure.
WARNINGS
- The vibration and noise emissions during actual use of the power tool can differ from the
declared values depending on the ways in which the tool is used especially what kind of
workpiece is processed; and
- It is necessary to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running
idle in addition to the trigger time).
SAFETY WARNINGS
General power tool safety warnings
WARNING
Read all safety warnings, instructions, illustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result in electric shock, fire
and /or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
a)
Keep work area clean and well lit.
Clutter or dark areas invite accidents.
b)
Do not operate power tools in explosive atmosphere, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
c)
Keep children and bystanders away while operating a power tool.
Distractions can
cause you to lose control.
Summary of Contents for 159845.01
Page 3: ...3 7 7 6 9 23 10 22 B D F C E G...
Page 4: ...4 H I J K L...
