45
EN
the battery cells.
• Protect the battery against heat, intense sunlight, fire, water
and moisture. Danger of explosion.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation as well as
wear personal protective equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
• Only use the appliance as intended by its design and these instructions.
• Ensure that the appliance is in good condition and well maintained.
• Use correct attachments for the appliance and ensure they are in good condition.
• Keep tight grip on the handles surface.
• Make sure the chain is sharp
• Take regular work breaks.
Residual Risk
Even if properly operating and handling this appliance in accordance with all the safety
requirements, potential risks of injury and damage remain. Due to its construction and
build, this tool may present the following hazards:
a) aCuts
b) Ear damage if working without ear protection
c) Damage to your health caused by swinging your hands and arms when operating the
tool for longer periods of time or if the tool is not held or maintained properly.
Warning!
During operating, the product generates an electromagnetic field which, under certain
circumstances, may impair the functionality of active or passive medical implants. To
reduce the risk of serious or lethal injuries, we recommend that persons with medical
implants consult their doctor and the manufacturer of their medical implant before
operating the electric tool.
BEFORE USE
Unpacking
1. Unpack all parts and lay them on a flat stable surface.
2. Make sure the delivery contents are complete and free of damage. If you find the
parts are missing or show damage, do not use the appliance but contact your Service
Centre. Do not use the appliance unless missing parts have been delivered in addition
or defective parts have been replaced. Using an incomplete or damaged product
represents a hazard to people and property.
3. Ensure that you have all the accessories and tools needed for assembly and operation.
Summary of Contents for 159845.01
Page 3: ...3 7 7 6 9 23 10 22 B D F C E G...
Page 4: ...4 H I J K L...
