40
EN
∫ Clean the lawnmower after each use
CLEANING AND MAINTENANCE
WARNING!
Always switch the appliance off, remove the battery pack and the safety key, and let the
appliance cool down before performing inspection, maintenance and cleaning work!
Warning! Danger of moving hazardous parts!
Cleaning
1. The appliance must always be kept clean, dry and free from oil or grease. Remove debris
from it after each use and before storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of the
lawnmower.
3. Inspect the appliance before each use for loose, worn and damaged parts. Do not
operate it if you find broken and worn parts.
4. Never allow fluids to get into the product. Never spray down the lawnmower with water.
5. Clean the appliance with a dry cloth or brush. Do not use any cleaning agents or
solvents.
6. Remove stubborn dirt with compressed air (max. 3bar) if necessary.
7. Do not use the chemical, alkaline, abrasive or other aggressive detergents or
disinfectants to clean the lawnmower as they might be harmful to its surface.
Maintenance
Before and after each use, check the appliance and accessories (or attachments) for wear
and damage. If required, exchange them for new ones as described in this instruction
manual. Observe the technical requirements
Replacing the cutting blade (Fig. J)
1. Turn the lawnmower over.
2. Wear firm gloves and keep hold of the cutting blade (25).
3. Use the spanner (28) to turn the bolt of blade (26) counter-clockwise from the motor
spindle (27).
4. Reassemble the new cutting blade (25) in reverse order. Make sure the cutting blade (25)
is positioned correctly and the bolt of blade is tightened.
WARNING!
Only use the cutting blade and accessories specified in the instruction manual and get
from the Service Centre.