b
a
g
e
a
e
b
d
c
f
e
Attaching the presser foot holder
Turn power switch to "O" before carrying out any of the operations below.
Raise the needle to its highest position and raise the presser foot lever.
Attach the presser foot holder (b) to the presser foot bar (a). (1)
Lower the presser foot holder (b) until the cut-out (c) is directly above the
pin (d). (2)
Raise the lever (e).
Lower the presser foot holder (b) and the presser foot (f) will engage
automatically.
Raise the presser foot.
Release the pressure foot by raising lever (e) located at the back of the
foot holder. (3)
Attach the seam guide (g) in the slot as illustrated. Adjust the distance as
required for hems, pleats, etc.... (4)
Attention:
Attaching the presser foot:
Removing the presser foot:
Attaching the seam guide:
1
3
2
4
9
All manuals and user guides at all-guides.com
