Euro-Pro SELECT EP923H, Owner'S Manual

GETTING TO KNOW  YOUR STEAM CLEANER WITH 

SOAP DISPENSER

1.

Safety Filler Cap

2.

Shoulder Strap

3.

Power “On” Light (Red)

4.

Steam Ready Light (Green)

5.

Flexible Hose

6.

Steam Switch

7.

Locking Button

8.

Power Cord

9.

Front Locking Tab

10. Caddy
11. Rear Locking Latch
12. Hand Grip Storage
13. Castors (x4)
14. Extension Tubes (x2)
15. Window Squeegee
16. Steam Pocket Frame
17. Steam Pocket

18. Pump Button
19. Soap Dispenser
20. Triangular Brush
21. Wall Paper Scraper
22. Concentrator For Wall Paper Scraper
23. Concentrator
24. Nylon Bristle Brushes (x2)
25. Brass Bristle Brush
26. Funnel
27. Soap Accessory Adapter
28. Small Pad Base
29. Large Pad Base 
30. Small Scrubbing Pad 
31. Large Scrubbing Pad 
32. Small Sponge Pad 
33. Large Sponge Pad 
34. Sample Bottle of Soap (8 oz.)

TIPS ON HOW TO USE YOUR SYSTEM

Note:

Soap scum sometimes will develop 

a hard surface from waterborne minerals.  

If this is the case, use the floor brush with 

no towel first to break up this surface - or 

spray or wipe first with lemon, vinegar or 

seltzer soda water to soften the minerals.

Moving too slowly can dry out the soap 

scum and cause it to granulate on the 

surface.  The surface will have a gritty 

feel.  If this happens, apply vapor to the 

surface with the open brush again and 

re-clean.

Bathroom Areas

To clean the bathtub or shower area, use 

the nylon bristle brush for grout, shower 

door tracks, hard to get areas and heavily 

soiled areas.  The dual edge window/tile 

squeegee will be the most efficient way 

to clean the rest of the area. Allow plenty 

of time for the heat to penetrate the 

surface.  This is especially helpful in the 

shower area if there is tile or grout. Wipe 

with towel.

Removal of soap scum on tile, grout, and 

shower doors is also easier with the 

steam cleaner.

Garden Furniture

Use any of the brushes depending on the 

surface area. Work quickly when 

cleaning resin outdoor furniture. Finish by 

wiping with a towel

Blinds

Use the nylon bristle brush to clean 

blinds.  Move the brush over the surface, 

allowing enough time for the vapor to 

penetrate.  Work quickly on PVC blinds. 

Test for color fastness on fabric blinds 

before using. Finish by wiping with a 

towel.

Automotive

For detailing the wheels, use the 

concentrator and the brass bristle brush.  

Exterior windows are cleaned best by 

applying the vapor with the concentrator 

and following with a paper towel.

To clean bicycles, use the nylon bristle 

brush.

To clean equipment, use the bristle 

brush, depending on the surface area. 

Finish by wiping down with a towel.

Upholstery

Use the triangle brush attached directly 

to the hand grip with a clean white terry 

cloth towel. Use fast, light strokes, avoid 

getting the fabric wet. Be patient with 

stubborn spots; work on a spot gently for 

no more than a minute at a time, then 

wait five minutes for the area to dry and 

repeat.  Use circular movements or back-

and-forth and side-to-side movements to 

get all sides of surface fibers then blot 

with a towel. Finish with a brushing in 

one direction that will give the fabric a 

uniform appearance.

CAUTION:

Always determine 

the color-fastness of any fabric-

especially with reds or blues - by taking a 

clean, moist, warm towel and gently 

rubbing a small area as far down on the 

back or other out of the way place on the 

furniture as possible.  If color comes off 

on the towel, you may need to have the 

piece dry cleaned.

Window, Glass Surfaces and Mirrors

Use the dual edge glass and tile 

squeegee.  Work with the vapor jet on 

using the top to bottom movements.  Use 

the squeegee with the vapor off to clear 

the water from the glass.  To do this 

without leaving streaks, use lateral 

movements from the top to the bottom of 

the surface. 

CAUTION

: 

When cleaning 

windows, always avoid any sudden 

changes in temperature to prevent glass 
breakage or cracks.

Fiberglass or Stainless Steel Surfaces

Use the triangle brush or nylon bristle 

brush.  Slowly move the brush over the 

surface to be cleaned.  The vapor will 

emulsify the dirt and grease on the 

surface.  Follow behind with a terry cloth 

towel over the brush to remove excess 

moisture and residue.

Tip

: An old idea for polishing stainless 

steel is to wipe it down with seltzer soda 

water after it is cleaned.

Soap Scum

Soap scum dissolves almost immediately 

under a combination of heat and 

moisture. Rinse the surface with a small 

amount of water afterwards or go back 

over it once more with a clean terry cloth 

towel.

Technical Specifications

Voltage:

120V.,  60Hz.

Power:

1550 Watts

Water Capacity:

40 US Fl. Oz. (1200 ml.)

Steam Generator:

Stainless Steel 

* Illustrations may differ from actual product.

3

14