H.264 Realtime Recorder Installation User Manual
Installation Guide
EVD-16/400A16HC
85
www.eurovideo-cctv.com
NTP Setup
NTP setup allows the DVR to have
its
internal clock synchronised with
an
External clock.
The default setting is “Off”
To set up hover on the “Off” a drop
down arrow will appear giving the
option to turn “On”.
Once “On”, two other options will
appear: Type allows selection
between:
Default
– Time server is
“time.bora.net”.
Domain
– Where
another time server name can be
added.
IP
– Where an IP address for a
time server can be input.
Select City
Once the NTP settings have been set,
you must then tell the DVR which time
zone you are in. This will allow it to
offset any time differences if the time
server you contact is in
a different zone.
Select City, the map screen will
appear. Hover over the city selection
box, a drop down arrow will appear, click
on the arrow. A list of time zones will be
displayed. Select the time zone where the
DVR is located.
The Click OK.
