background image

Euroboor Angle Grinder – AGR.2200/180, AGR.2200/230 

 

Overview 

 
 1. Switch trigger  
 2. Drive shaft 
 3. Side handle 
 4. Gear box  
 5. Housing handle 
 6. Protective cover 
 7. Lock button 
 8. External flange spanner 
 9. External flange with thread 
10. Internal flange 
11. Lock off button  
12. Hex key 
 

General Safety Instructions for Electric Tools 

 
This device is exclusively for private use! It is not fit for commercial use! 

WARNING!

 Read all instructions. Failure to follow all instructions listed below may result in electric 

shock, fire and/or serious injury : 

SAVE THESE INSTRUCTIONS 

 
 

1 )Work area 

• Keep work area clean and well lit. Cluttered and dark areas invite accidents 
• Do not operate machines in explosive atmospheres, such as in the presence of flammable liquids,  
   gases or dust. Machines create sparks which may ignite the dust or fumes. 
• Keep children and bystanders away while operating a machine. Distractions can cause you to lose  
   control. 
 

2) Electrical safety 

• Machine plugs must match the outlet. Never modify the plug in any way. Do not use any adapter  
   plugs with earthed (grounded) machines. Unmodified plugs and matching outlets will reduce risk of  
   electric shock. 
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and  
   refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. 
• Do not expose machines to rain or wet conditions. Water entering a machine will increase the risk  
  of electric shock. 
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the machine. Keep  
   cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the  
    risk of electric shock. 
• When operating a machine outdoors, use an extension cord suitable for outdoor use. Use of a cord  
    suitable for outdoor use reduces the risk of electric shock. 
 

 

 

3)Personal safety 

• Stay alert, Watch what you are doing and use common sense when operating a machine. Do not 

use a machine while you are tired or under the influence of drugs, alcohol or medication. A 
moment of inattention while operating machines may result in serious personal injury. 

Summary of Contents for AGR.2200/180









Reviews: