12
3. Preparation & adjustment
3.1 Assembly
WARNING: To reduce the risk of injury, turn unit off and disconnect machine from power
source before installing and removing accessories, before adjusting or changing set- ups or
when making repairs. Be sure all switches are in the OFF position. An accidental start-up can
cause injury.
FITTING THE FEED HANDLE
1.
Take the ratchet feed handle, and line the square (image 2-1, ①) up with the square
opening in the machine feed axle.
2.
Push the ratchet in the machine feed axle while pressing the release button on the ratchet
(image 2-2, ②)
You can place the feed handle in a position that best matches your drilling set-up
3.
To change the rotation direction of the ratchet feed handle, you can switch the small lip
(image 2-2, ③):
a.
To move the ratchet feed handle in clockwise direction, switch the lip to the left
b.
To move the ratchet feed handle in counterclockwise direction, switch the lip to the
right
[image 2-1]
[image 2-2]
Summary of Contents for ECO.36
Page 32: ...32 8 Exploded view spare part list 8 1 Exploded views...
Page 33: ...33...
Page 34: ...34...
Page 36: ...36 8 3 Wiring diagrams...
