12
3.
Preparation & adjustment
3.1 Assembly
WARNING:
To reduce the risk of injury, turn machine off and disconnect from power source
before installing and removing accessories, before adjusting or changing set- ups or when
making repairs. Be sure all switches are in the OFF position. An accidental start-up can cause
injury.
Fitting the feed handle
1.
Take the ratchet feed handle, and line the square up with the square opening in the machine
feed axle (image 3-1);
2.
Push the ratchet feed handle in the machine feed axle while pressing the release button on
the ratchet feed handle (image 3-3). You can place the feed handle in a position that best
matches your drilling set-up;
3.
To change the rotation direction of the ratchet feed handle, you can switch the small lip on
the ratchet feed handle (image 3-2):
a.
To move the ratchet feed handle in clockwise direction, switch the lip to the left;
b.
To move the ratchet feed handle in counter clockwise direction, switch the lip to the
right;
[image 3-1]
[image 3-2]
Summary of Contents for ECO.36+
