background image

GB

11

10

Loading and layout advice

Each shelf can be used as a storage shelf, sliding shelf or display shelf.  The shelves in your cabinet have 12 
recesses, allowing your bottles to be stored safely.

Shelf specially developed for wine cabinets in the Oxygen range.

18 dowel pins supplied in the accessories bag

Installing a shelf in storage version:

To install bottles on a storage shelf, proceed as follows:
1. 

Insert 2 runners in the shelf support strips.  For each shelf, 

position one runner on the right and one runner on the left (see 
diagram  1).    Ensure  that  the  runners  are  correctly  fixed  in  their 
housing (see diagram 2)
2. 

Place the shelf in the 2 runners. (see diagram 3)

3. 

Place a locking dowel in each of the 2 holes 

located at the front of the shelf, in the upper section. 

 

 

These pins then fix the shelf with respect to the runner and prevent 
any unwanted movement.
4. 

Start by placing bottles in each recess of the back row with 

the base of the bottle towards the back.
5. 

Continue by placing the bottles in the opposite direction on 

the front row.
6. 

Continue stacking the bottles, ensuring that no bottles touch 

the back wall.

7. 

A storage shelf can support a maximum of 6 rows of 12 

bottles, i.e.72 traditional Bordeaux bottles.

Runners (x2)

Shelf - 12 recesses

Dowels (x2)

1

2

3

Diagram 1

Diagram 3

Diagram 2

N.B: For optimal use of your storage shelf, attach the rubber studs to the rear of the shelf, one 
on the left, the other on the right, ensuring that no bottles touch the back wall.

Installing a shelf in display version:

To install bottles on a display shelf, proceed as follows:

1.  Insert 2 runners in the shelf support strips.  For each shelf, position one runner on the right and 

one runner on the left (see diagram 1 and 2).

2.  Place the shelf in the 2 runners (see diagram 3).
3.  Place a locking dowel in each of the 2 holes located at the front of the shelf, in the upper section.  

These pins then fix the shelf with respect to the runner and prevent any unwanted movement.

4.  Start by placing bottles in each recess of the back row with the base of the bottle towards the 

back (6 traditional Bordeaux bottles).

5.  Continue stacking the bottles on the back row  

(6+6+6+6 = 24 traditional Bordeaux bottles), ensuring that no 
bottles touch the back wall.

6.  To display your bottles, place them vertically at the front of the shelf 

(maximum capacity : 6 traditional Bordeaux bottles).

7.  In display version, the shelf has a maximum capacity of 30 traditional 

Bordeaux bottles.

Installing a shelf in sliding version:

To install bottles on a sliding shelf, proceed as follows:

1.  Insert 2 runners in the shelf support strips. For each shelf, position one runner on the right and 

one runner on the left (see diagrams 1 and 2).

2.  Place the shelf in the 2 runners (see diagram 3).
3.  Place a locking dowel in each of the two holes located at the back of the shelf, in the upper 

section.  These pins prevent the shelf from sliding all the way out of the cabinet.

4.  Start by placing bottles in each recess of the back row with the base of the bottle towards the 

back. 

5.  Continue by placing the bottles in the opposite direction on the front 

row.

6.  A sliding shelf can only hold a single row of bottles (maximum of 12 

traditional Bordeaux bottles).

7.  In the case of a mixed layout, for optimal accessibility, we recommend 

that you place the sliding shelves in the central section of the appliance.

NEVER PULL OUT MORE THAN ONE LOADED SLIDING SHELF AT A TIME.

If you do not have enough bottles to fill your wine cabinet, it is preferable to spread the load over the 
entire cabinet rather than placing bottles “all at the top” or “all at the bottom”.  For optimal performance, 
we recommend that you use the cabinet at over 75% of its capacity.

Installing the specific grid for beverages 

(only available on the 

2 temperatures model - OXY2TVD6COUS)

1.  Place a universal ArteVino shelf in the beverage center.
2.  Place the grid on the ArteVino shelf (see diagram 4). 
Install your bottles and cans upright on the grid.

Presentation shelf:

Models OXYVD8WCOUS/ OXYVG8WCOUS are equipped with 1 
presentation shelf.

Diagram 4

Summary of Contents for ArteVino OXY2TVD6COUS










Reviews: