background image

GB

15

14

Operating faults

When starting up

• The compressor does not work > 

check that the wall socket is supplied with power by plugging in 

another electrical appliance.

• The compressor never stops > 

put your hand on the condenser (grill located on the back of the 

appliance). If the condenser is cold, contact your retailer.
If the condenser is hot, set your cabinet (ST1) to the maximum temperature setting value.  If the compressor 
still does not stop, contact your retailer.

• The wine cabinet does not switch on >

 contact your dealer.

ANY WORK CARRIED OUT BY TECHNICAL SERVICES NOT APPROVED BY ARTEVINO 
SHALL RENDER THE WARRANTY NULL AND VOID.

THE USE OF A GLASS DOOR CAN AFFECT THE PERFORMANCE OF YOUR WINE CABINET 
IN SOME EXTREME TEMPERATURE CONDITIONS.

Energy and technical features

Model

Temperature

Height

(mm)

Width

(mm)

Depth

(mm)

Weight

(Kg)

Accuracy

1 temperature models 

OXYVD8WCOUS / 

OXYVG8WCOUS

1

1825

680

690

86

+/- 3 °F

Electrical 

power* 

(Watts)

Consumption

(kWh/ 24hrs)*

Voltage**

(V)

Frequency**

(Hz)

Recommended T° 

range

Min. T° 

Max. T° 

100

0.700

115

60

32°F

86°F

Annual energy 

consumption AEc***

(Kwh/year)

Useful 

volume

(litres)

Acoustic 

emissions

(dB(A))

256

460

38

Model

Temperature

Height

(mm)

Width

(mm)

Depth

(mm)

Weight

(Kg)

Accuracy

2 temperatures 

model 

OXY2TVD6COUS

2

1825

680

690

92

+/- 3 °F

Electrical 

power* 

(Watts)

Consumption

(kWh/ 24hrs)*

Voltage**

(V)

Frequency**

(Hz)

Recommended T°  range

Min. T° 

Max. T° 

110

0.900

115

60

54°F

86°F

Annual energy 

consumption AEc***

(Kwh/year)

Useful 

volume

(litres)

Acoustic 

emissions

(dB(A))

329

445

38

* Measured with an external temperature of 77°F.
** Depending on the country, these values can vary; to find out the specific properties of your appliance, consult your appliance’s 
product identification label.
*** Energy consumption calculated based on the result obtained over 24 hrs in standard test conditions.  Actual energy consumption 
depends on the appliance’s location and operating conditions.
This appliance is intended solely for storing wine.
Category of all models:2
Climate class: our appliances are designed to be used at an ambient temperature of 50°F - 90°F - Class SN – Nevertheless, refer to 
the table of technical features above to find out the optimal performance for your product.
This model cannot be flush-fitted.

Summary of Contents for ArteVino OXY2TVD6COUS










Reviews: