74
16. Care and cleaning
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
casing or stop the product from functioning properly.
• Disconnect the product from the power supply before cleaning. To do this, remove the battery.
• Never submerge the product in water.
• Use a dry, lint-free cloth to clean the product.
17. Maintenance
a) Cleaning the rain funnel
N
N
N
‘Lock’ position ‘Unlock’ position
1. Unscrew the rain funnel 30° anticlockwise.
2. Carefully remove the train funnel.
3. Clean and remove any debris or insects from the
funnel.
4. Reinstall the funnel when it is clean and completely
dry.
b) Cleaning the thermal-hygro sensor module on the outdoor sensor
1. Remove the 2 screws from the bottom of the radiation shield (F).
2. Pull off the radiation shield.
3. Carefully remove any dirt or insects from the sensor casing. Do not let the
sensors get wet on the inside.
4. Clean the radiation shield with water to remove dirt or insects.
5. Reinstall all parts in reverse order when they are clean and completely dry.
Locked
Loose
