Instruction Manual ZHK
V07-19.0
19/129
Figure 4:
Transport correct
Figure 5:
Transport incorrect
Center of gravity must be centrally located between the forks (see
). For large parts use
several lift trucks.
Figure 6:
Center of gravity centrally between the forks
For the overlifting directly by crane from the truck applies the following
chapter
3.3 (Overlifting of AHU sections with crane lugs)
for AHU sections or
chapter
3.4 (Overlifting of monoblocs)
for monoblocs.
3.3
Overlifting of AHU sections with crane lugs
Chapter 3.3 is only valid for the delivery form
“Delivery in parts (delivery sections)”
.
For overlifting of AHU
s delivered as “Monobloc”, see
chapter 3.4
-
In addition to the actions mentioned here, the instructions according to
chap-
have to be observed.
-
Parts of the AHU may only be lifted with lugs individually - never bolt parts to-
gether before lifting.
-
Lateral load on lifting lugs is not allowed.
The lifting of monoblocs by crane lugs is permitted only in exceptional circum-
stances and requires the
written approval
by EUROCLIMA.
Summary of Contents for ZHK Series
Page 1: ...ZHK INSTRUCTION MANUAL ...