manualshive.com logo in svg

EUROCOM Sky X6, User Manual

The EUROCOM Sky X6, a high-performance laptop, offers unparalleled gaming and multitasking capabilities. Unlock the full potential of this remarkable device with the comprehensive User Manual, available for free download at 88.208.23.73:8080. Explore its features, master its functions, and unleash the power of the EUROCOM Sky X6.

Share
Download
background image

Modules

6 - 74 Trusted Platform Module

6

TPM Actions

1.

Click 

Prepare the TPM 

and follow the instructions in the Wizard

 to 

prepare the 

TPM (this will probably require a restart of the computer and confirmation of the 
setting changes after restart by pressing the appropriate F key).

2.

After the restart the TPM will be prepared and you can then use the 

Actions

 menu 

to 

Turn TPM off

, 

Change Owner Password

, 

Clear TPM

 or 

Reset TPM Lockout

.

3.

A wizard will help take you through any setup steps.

Figure 6 - 54

TPM Actions Menu

Summary of Contents for Sky X6

































































































































































































































































































































Reviews:

No comments

Related manuals for Sky X6

EarthWalk eBuddy 6.8 User Manual preview
eBuddy 6.8
Brand: EarthWalk Pages: 79

Brands by name

Popular brands

Load more brands