EUROCOM Sky X6 User Manual Download

Page: 247 / 320

Control Center & Flexikey®

Overview B - 1

Appendix B: Control Center & Flexikey®

Overview

The following chapter will give a quick description of the functions of the

Control Center & Flexikey®

appli-

cations.

Control Center

The

Control Center

gives quick access to frequently used controls, power management features and enables you

to quickly turn modules on/off. Click the

Control Center

icons to toggle the appropriate function, or hold the

mouse button down and move the dial control where applicable. Certain functions will automatically be adjusted
when a power mode is selected. The

Control Center

Windows 10

works under the

Desktop

app and not under

the Start screen.

Flexikey®

The

Flexikey®

application is a quick hotkey configuration application, which allows you to

assign a single key

launch multiple key combinations

, or to

launch programs and applications

, to

create text macros

and to

disable

certain keys. The application can also be used to

configure the mouse buttons

to create hotkeys for

gaming etc. All the configuration settings are retained under (up to12)

profiles

to which the settings are applied.

Click

Flexikey®

in the

Gaming

section of the Control Center, or the

click the icon

in the notification

area of the taskbar, to launch the application.

Summary of Contents for Sky X6

































































































































































































































































































































Search results

Summary of Contents for Sky X6

Reviews:

Related manuals for Sky X6

Brands by name

Popular brands

EUROCOM Sky X6, User Manual

Search results

Summary of Contents for Sky X6

Reviews:

Related manuals for Sky X6

Brands by name

Popular brands