manualshive.com logo in svg

EUROCOM Sky X6, User Manual

The EUROCOM Sky X6, a high-performance laptop, offers unparalleled gaming and multitasking capabilities. Unlock the full potential of this remarkable device with the comprehensive User Manual, available for free download at 88.208.23.73:8080. Explore its features, master its functions, and unleash the power of the EUROCOM Sky X6.

Share
Download
background image

Control Center & Flexikey®

Keyboard Settings - Express Key B - 23

B

6.

You can edit the delay between key presses by clicking in the 

Delay Time (MS)

 field and typing a new number 

for the delay between the key presses.

Figure B - 19

 - Time Record Between Key Presses

7.

Click 

 to close the Time Record window.

8.

Click 

Save

 to save the settings within your chosen profile.

9.

If you want to remove any individual key click to select it, and then click 

Delete

.

10. If you want to clear all the settings click 

Restore

 to return to the default key setting.

Summary of Contents for Sky X6

































































































































































































































































































































Reviews:

No comments

Related manuals for Sky X6

Brands by name

Popular brands

Load more brands