manualshive.com logo in svg

EUROCOM Sky X6, User Manual

The EUROCOM Sky X6, a high-performance laptop, offers unparalleled gaming and multitasking capabilities. Unlock the full potential of this remarkable device with the comprehensive User Manual, available for free download at 88.208.23.73:8080. Explore its features, master its functions, and unleash the power of the EUROCOM Sky X6.

Share
Download
background image

Control Center & Flexikey®

Keyboard Settings - Express Text B - 27

B

4.

Click in 

Send

 key if required (the 

Send

 key is the key used to in your target program to send a text message e.g 

the Enter key would be the most commonly used), or you can leave it blank if you prefer.

5.

The key will now be configured to send the text message in the target program under your chosen Profile, and 
the key will appear in 

blue

.

6.

If you want to remove any 

Express Text 

key, select it and click on 

Restore

.

7.

Click 

Save

 to save the settings within your chosen profile.

Copy & Paste Text

Note that some applications and games do not support copy and pasted text. Where this is the case, any text you may have
copy and pasted in to the “Type to Text” field may not be displayed within the application. In this case you will need to type
the text into the field instead.

Summary of Contents for Sky X6

































































































































































































































































































































Reviews:

No comments

Related manuals for Sky X6

Brands by name

Popular brands

Load more brands