manualshive.com logo in svg

EUROCOM Sky X6, User Manual

The EUROCOM Sky X6, a high-performance laptop, offers unparalleled gaming and multitasking capabilities. Unlock the full potential of this remarkable device with the comprehensive User Manual, available for free download at 88.208.23.73:8080. Explore its features, master its functions, and unleash the power of the EUROCOM Sky X6.

Share
Download
background image

Control Center & Flexikey®

Mouse Settings - Express Text B - 33

B

Mouse Settings - Express Text

A mouse button click can be set to send a string of text within any application using 

Express Text

.

1.

Enable

 and select the mouse under your chosen profile, click on a mouse button to select it, and then click to 

select 

Express Text

 in 

Action Type

.

2.

Click in 

Start

 key if required (the 

Start

 key is the key used to in your target program to open a text message), or 

you can leave it blank if you prefer.

3.

Click in the 

Text Context

 field and type in your message.

Figure B - 27

 - Mouse - Express Text

Summary of Contents for Sky X6

































































































































































































































































































































Reviews:

No comments

Related manuals for Sky X6

Brands by name

Popular brands

Load more brands