manualshive.com logo in svg

EUROCOM Sky X6, User Manual

The EUROCOM Sky X6, a high-performance laptop, offers unparalleled gaming and multitasking capabilities. Unlock the full potential of this remarkable device with the comprehensive User Manual, available for free download at 88.208.23.73:8080. Explore its features, master its functions, and unleash the power of the EUROCOM Sky X6.

Share
Download
background image

VII

Preface

Instructions for Care and Operation

The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:

1.

Don’t drop it, or expose it to shock.

 If the computer falls, the case and the components could be damaged.

2.

Keep it dry, and don’t overheat it.

 Keep the computer and power supply away from any kind of heating ele-

ment. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly dam-
aged.

Do not expose the computer 
to any shock or vibration.

Do not place it on an unstable 
surface.

Do not place anything heavy 
on the computer.

Do not expose it to excessive 

heat or direct sunlight.

Do not leave it in a place where 

foreign matter or moisture may 

affect the system.

Don’t use or store the computer 

in a humid environment.

Do not place the computer on 

any surface that will block the 

Vents/Fan Intakes.

Summary of Contents for Sky X6

































































































































































































































































































































Reviews:

No comments

Related manuals for Sky X6

Lenovo IdeaPad S400 Touch Specifications preview
IdeaPad S400 Touch
Brand: Lenovo Pages: 2
Lenovo ideapad 320-14IKB Hardware Maintenance Manual preview
ideapad 320-14IKB
Brand: Lenovo Pages: 82
Lenovo ideapad 300S-14ISK Hardware Maintenance Manual preview
ideapad 300S-14ISK
Brand: Lenovo Pages: 95
Lenovo ThinkPad Edge 15 Hardware Maintenance Manual preview
ThinkPad Edge 15
Brand: Lenovo Pages: 158

Brands by name

Popular brands

Load more brands